Well, I know I just shared our Patio Reveal back in June, but it's already experienced some big changes. At the time I put together the Quick Patio Makeover Mood Board we still weren't sure whether we were going to be tackling the deck this year. The structure was solid but the surface had seen better days -- it was splinter-y {that's probably not a word} and faded. After checking out several options, we chose Deck ReStore by Rustoleum.
** This is not a sponsored post.
UPDATE May 2014: We've received many comments asking how the deck looks now. Unfortunately, we had to move in December so I can't provide an update. As of December 2013 {approximately 6 months post-application since we applied it in July 2013} it was still in perfect condition. We live in Central Kentucky and had already experienced several snowfalls; but overall Kentucky's winters are not very harsh in comparison to the Northeast United States.
I do want to reiterate that our deck was in poor condition. We read both negative and positive reviews on Restore from Amazon/Home Depot/etc. This post and comment thread from One Project Closer was extremely helpful. After researching Restore, even though we read some negative comments, we felt it was worth the risk. Restore was going to cost us $100s of dollars as opposed to a new deck which would be $1000s of dollars.
So, as a fellow consumer, I encourage you to research the product as well. Read both the good and the bad experiences and make the best decision for your home.
UPDATE Sept 2014: Check out Carrie's Deck Restore Makeover, which has been in place for 1 year.
We looked into 3 options to improve the surface of the deck.
(1) Staining - This is the traditional deck care method, stain every couple years. However, we hadn't stained it in the 5 years we'd lived here -- and the surface was already in poor condition when we purchased the home. This was definitely the cheapest option; but since it hadn't been maintained properly over the years, we weren't sure it would make a signifigant difference.
(2) Composite Decking - Our front porch has been replaced with maintenance free composite decking and the surface is so great to walk-on and easy to clean. Unfortunately, it's pricey at over $20 a deck board. We weren't very excited about investing that type of cash, especially since we knew we might be moving.
(3) Deck ReStore - Much more durable than stain, it has a lifetime of about 10 years. It would also fill in any gaps and literally cover the surface so that splinters wouldn't be a problem. Some reviews suggested it might be rough on your feet; but we decided we prefer a rough surface over splinters in our feet. It's not a cheap treatment at about $40 per 2-gallon bucket, but it was much more affordable than Composite Decking.
1. First Things, First
Before we started painting we sprayed the surface with deck cleaner and hammered any screws that had popped up back into place.
Note: Anytime I say "we" in this post, I really mean Mike. We did hire the help of a couple great teens from our old church and they did an awesome job. Thanks, Mike, Rachael & Kristian! I love our new deck!
Cleaning the deck made a huge difference, actually. It returned it to a more natural wood tone as opposed to the mildew-y greenish gray we had going on before.
2. Do Some Research
We read a ton of reviews and referred to this video from Rustoleum several times. We followed the instructions in the video pretty closely and picked up some tips from the reviews.
The color we chose was simply called Gray. Our shutters, garage and exterior doors are painted in a medium gray, which seemed to be similar to the ReStore Gray.
We also considered Cape Cod Gray, but were concerned it might be too light and just blend in with our siding. Another option was Pewter, but we didn't want to go so dark that it got hot in the summer heat. After applying the Gray, I love the color and know we made the right choice. It blends perfectly with our home.
Our deck is 24'L x 11.5'W, or 276 Sq Ft, not including the steps. A 2 Gallon bucket of paint is supposed to cover 50 Sq Ft with 2 coats. We found this to be pretty accurate, since we used 6-2 Gallon buckets to complete the deck.
You do need dry weather to take on this project. The product suggests 24-48 hours before you begin applying the product and 24-48 hours after you finish. We cleared off our deck to start this project and then had the rainiest two weeks ever. Our yard looked like this for nearly a month. Don't you want to Pin this?
3. Stain for Days and Days on End
Now I know you are thinking, why stain? I thought this was paint? Well, it is, but you use a matching Deck ReStore solid stain on the spindles and any other vertical surface. This was tedious, because there were just so many spindles and so many other vertical surfaces on the sides of the deck that we had just not really thought much about.
The stain itself was easy to work with and covered pretty well. It took 1-2 coats {i.e. one coat with a whole lot of touching up} and 2 gallons of stain. We began with a brush initially, but added in a roller as we went. I'd trim all the edges with the brush, someone else would roll the spindles and then I'd come back with the brush for touch-ups.
See all those spindles? That's why it felt like we stained for days and days. In reality, we probably did spend at least two 8 hour days, with 2 people, working on the spindles and vertical surfaces. However, the first day was using the brush only, which was much slower.
4. Mix your Paint and Prep the Area
A tip we had read in the reviews was to add about 1 cup of water per gallon. This seemed to work really well. It thinned out the paint enough to make it easy to apply but didn't remove the texture in the application or the ability for the paint to fill in gaps and cover splinters.
By the way, that photo above is of the railing. We did apply 1 coat of paint over the stain on the railing. Even though this isn't a surface you walk on, it is where we rest our hands, lean, etc. So it made sense to give it a coat of the paint to remove splinters here too.
The paint is thick and will splatter so it's a good idea to tape off anywhere that you might come into contact with your house.
You may have noticed by now that the roller is not a typical roller. We did buy the Deck ReStore roller and liked how it worked. Some reviewers said they switched to using a typical nap roller, but we thought this ReStore honeycomb roller created the texture we hoped to have after applying ReStore to our deck.
5. Roll the Deck Boards
The rolling went pretty quickly, it took 2 days, but that was just because we wanted to give the first coat time to dry before applying the second coat.
The photo above shows the completed first coat. We had accidentally skipped a step at this point.You are supposed to brush stain along the edges of the boards, trying to get in between the boards a bit. The purpose of this step is to conceal any difference in color between the natural wood tone and paint. So, prior to applying the second coat we rigged up a long handled brush and stained in between the gaps.
Once the second coat was applied, the coverage was great. We love how it looks and feels!
The texture doesn't bother our bare feet at all. It feels about a millon times better than walking on this splintery mess:
I don't think it would even bother someone with really sensitive feet, because the texture just isn't that thick. Here is a side-view to give you an idea of how thick it applied.
6. Enjoy Your New Deck.
Since the deck surface is essentially brand new, it feels like we got composite decking for a fraction of the cost. If our new home has an old deck, you can bet this project will be on our to-do list.
Thanks for sticking through this long post and please comment or email if I left any of your questions unanswered. Also if you've used this product, I'd love to hear what your experience was with it.
Do you have a deck? If so, what kind of condition is it in? Would you tackle a project like this -- or do you stain it faithfully every few years?
If you enjoyed this post, we would love for you to subscribe to our email list.
Labels: Before and After, DIY, Lora's Home, Outdoors
